Mr. Bur One Slice IPR Kit: Ultra-Thin IPR Burs for Accurate Enamel Reduction in Clear Aligner and Braces Treatments

May 07, 2025Mr. Bur
Mr. Bur One Slice IPR Kit, precision interproximal reduction burs for aligner and Invisalign treatments, ideal for controlled enamel reduction and crowding relief.

Interproximal Reduction (IPR) is a cornerstone of modern orthodontics, particularly for clear aligner therapies like Invisalign. Achieving precise enamel reduction without compromising patient comfort or tooth integrity requires advanced tools. The Mr. Bur One Slice IPR Kit, a 23-piece set, is designed to streamline IPR with exceptional accuracy. Central to this kit is the X02 bur, a 0.2 mm bur that ranks among the thinnest IPR burs available. Here’s why this kit—and its standout performer—belongs in every orthodontist’s practice.

Orthodontic Use

The Mr. Bur One Slice IPR Kit, with its range of pre-calibrated burs (0.2 mm to 0.5 mm), is designed for a variety of orthodontic scenarios requiring interproximal reduction. The kit’s versatility makes it suitable for both clear aligner and traditional orthodontic treatments. Below are key clinical cases where the kit’s burs are applied:

  • Crowding Resolution in Aligner Therapy: The kit’s burs create precise interproximal spaces (0.2–0.5 mm) to address mild to moderate crowding (1–5 mm) in Invisalign or other aligner cases, enabling tooth movement without extractions and ensuring accurate aligner fit.

  • Arch Coordination and Occlusion Adjustment: In cases of arch discrepancies or improper occlusion, the kit’s burs facilitate space creation to align teeth and improve bite relationships, supporting both aligner and bracket-and-wire systems.

  • Tooth Size Discrepancy Correction: For Bolton discrepancies, the kit allows controlled enamel reduction to balance tooth sizes between upper and lower arches, enhancing occlusion and treatment outcomes.

  • Space Creation for Restorative Work: The kit is used to prepare teeth for restorative procedures (e.g., veneers or crowns) by creating minimal interproximal spaces, ensuring proper restoration fit while preserving aesthetics.

  • Interceptive Orthodontics in Mixed Dentition: In pediatric cases, the kit’s finer burs create small spaces to guide erupting permanent teeth, addressing crowding early and reducing the need for extensive future treatments.

These cases demonstrate the kit’s broad applicability, making it an essential tool for orthodontists seeking efficiency and precision in IPR procedures.

To know more about IPR’s role in aligner therapy, you may check out: The Role of Interproximal Reduction (IPR) in Clear Aligner Therapy: A Critical Analysis of Indications and Techniques

Spotlight on the X02 Bur: 0.2 mm of Precision

Mr. Bur X02 Bur, ultra-thin 0.2 mm IPR bur for precise enamel reduction in Invisalign refinements and anterior tooth adjustments.

The X02 bur, with its 0.2 mm thickness, is the thinnest bur in the One Slice IPR Kit, designed for scenarios requiring minimal enamel reduction with maximum precision. Its ultra-thin profile offers unique advantages in specific orthodontic cases, enhancing treatment outcomes. Here’s how the X02 bur is utilized:

Cases Apply

  • Precision in Invisalign Refinements: The X02 bur creates 0.2 mm spaces for fine-tuning tooth positions in Invisalign cases, particularly for mild crowding (1–2 mm). Its precision ensures aligners fit snugly without over-reducing enamel, critical for patients with thin enamel or aesthetic concerns.

  • Anterior Aesthetic Corrections: For incisors and canines, the X02 bur’s 0.2 mm thickness allows subtle reductions to achieve a natural smile. It minimizes sensitivity risks in cosmetically sensitive areas, making it ideal for patients prioritizing aesthetics.

  • Micro-Adjustments for Bolton Discrepancies: In cases of minor tooth size mismatches, the X02 bur delivers micron-level reductions (0.2 mm) to balance arch proportions. This precision prevents excessive enamel loss, maintaining tooth integrity.

  • Pediatric Orthodontics with Delicate Enamel: In younger patients, the X02 bur’s minimal reduction (0.2 mm) creates space for interceptive treatments without compromising thin enamel. It’s perfect for mixed dentition cases where crowding is addressed early.

  • Post-IPR Surface Refinement: After larger reductions with thicker burs (e.g., 0.3 mm or 0.5 mm), the X02 bur smooths interproximal surfaces for a polished finish, reducing patient discomfort and ensuring optimal aligner or bracket fit.

The X02 bur’s thin profile makes it a go-to tool for delicate, high-precision cases, offering orthodontists unmatched control and patient-friendly outcomes.

Technical Specs

  • Thickness: 0.2 mm, among the thinnest IPR burs available.

  • GritFine, for smooth cutting and minimal post-polishing requirements.

  • ShankCompatible with standard high-speed handpieces.

  • Single-Use: Guarantees optimal sharpness and hygiene.

Looking for Even Thinner Options? Explore Our Diamond Strips

Mr. Bur single-sided diamond strips with serrated edge for controlled interproximal enamel reduction, ideal for IPR, polishing, and finishing in tight anterior spaces.

While the X02 bur at 0.2 mm offers exceptional precision for rotary IPR, some clinical scenarios demand even thinner tools for ultra-fine reductions or polishing. For these cases, Mr. Bur Diamond Strips, such as the SS08 (0.08 mm), provide an ideal solution. Here’s why dentists turn to these strips: 

  • Ultra-Thin Profile: At 0.08 mm, the SS08 strip is significantly thinner than the X02 bur, enabling micron-level enamel reduction for the most delicate adjustments.

  • Polishing and RefinementPerfect for smoothing interproximal surfaces after bur-based IPR, ensuring patient comfort and optimal aligner fit.

  • Tight Spaces: The flexible strip design excels in crowded or hard-to-reach areas, where rotary burs may be less practical.

  • Manual Precision: Offers tactile control for finishing touches or minimal reductions (e.g., 0.05–0.1 mm), ideal for anterior teeth or pediatric cases.

  • Versatile ApplicationsComplements the One Slice IPR Kit by providing a non-rotary option for Invisalign refinements, aesthetic corrections, or post-IPR polishing.

When to Choose Diamond Strips Over the X02 Bur:

  • Use strips for ultra-fine reductions (less than 0.2 mm) or when polishing is the primary goal.

  • Opt for the X02 bur when speed and single-pass efficiency are priorities, such as in initial space creation for aligners.

By combining the One Slice IPR Kit’s X02 bur with Mr. Bur’s Diamond Strips, orthodontists can address every IPR need with precision and flexibility.

Choosing Between IPR Burs and Diamond Strips: Patient and Dentist Considerations

Selecting between IPR burs (like the Mr. Bur One Slice IPR Kit’s X02 at 0.2 mm) and diamond strips (like the SS08 at 0.08 mm) depends on patient tooth conditions, clinical requirements, and dentist preferences. Below is a guide to help orthodontists make informed decisions:

  • Patient Tooth Conditions:

    • Thick Enamel and Moderate Crowding: Use IPR burs (e.g., X02 or X05) for patients with robust enamel and moderate crowding (2–5 mm). Burs efficiently create 0.2mm –0.5 mm spaces in a single pass, ideal for Invisalign or bracket systems where larger reductions are needed.

    • Thin Enamel or High Sensitivity RiskOpt for diamond strips (e.g., SS08) for patients with thin enamel or a history of sensitivity. The 0.08 mm strip allows ultra-fine reductions (0.05–0.1 mm) and polishing, minimizing enamel loss and discomfort, especially in anterior teeth.

    • Crowded or Inaccessible AreasChoose diamond strips for tightly crowded teeth or interproximal areas with limited access (e.g., rotated incisors). The flexible strip navigates confined spaces better than rotary burs, ensuring precise reductions without collateral damage.

    • Pediatric or Young Patients: Prefer diamond strips or the finest burs (e.g., X02) for children with delicate enamel. Strips provide tactile control for minimal reductions, reducing the risk of over-reduction in mixed dentition cases.

  • Dentist Preferences and Procedural Goals:

    • Speed and Efficiency: Dentists prioritizing time efficiency should select IPR burs for initial space creation. The X02 bur’s single-pass 0.2 mm reduction is faster than manual strips, ideal for busy practices or cases requiring multiple IPR sites.

    • Tactile Control and PrecisionFor dentists who value manual precision, diamond strips offer greater control, especially for polishing or ultra-fine adjustments. Strips are preferred when refining surfaces post-bur or achieving aesthetic perfection in anterior teeth.

    • Initial vs. Finishing Stages: Use burs for initial IPR in aligner therapy to create defined spaces (e.g., 0.2–0.5 mm). Switch to strips for finishing to smooth surfaces or make incremental adjustments, ensuring patient comfort and aligner compatibility.

    • Complex Cases with Mixed Needs: In cases requiring both significant and subtle reductions (e.g., crowding plus aesthetic refinement), combine burs for larger spaces and strips for polishing or fine-tuning. For example, use the X02 bur for 0.2 mm spaces, then the SS08 strip for a polished finish.

By assessing patient tooth conditions and aligning with dentist preferences, orthodontists can optimize IPR outcomes using the Mr. Bur One Slice IPR Kit and its complementary diamond strips.

To know how the One Slice IPR Kit compares to other tools, you may check out: One Slice IPR Kit vs. Traditional Tools: Enhancing Interproximal Reduction

What’s in the 23-Piece Kit?

The Mr. Bur One Slice IPR Kit includes a comprehensive range of burs to meet diverse clinical needs:

  • X02 (0.2 mm): For minimal reductions, primarily on anterior teeth.

  • X03 (0.3 mm)For slightly larger reductions, suitable for anterior and posterior teeth.

  • X05 (0.5 mm)For moderate crowding or posterior teeth.

  • Super-Fine OptionsE.g., X03SF (0.3 mm, super-fine) for polishing or delicate work.

  • Specialized BursTailored for specific aligner protocols or tooth types.

This versatile set equips orthodontists with the tools needed for every IPR scenario, from subtle refinements to significant space creation.

To know how to protect enamel during IPR, you may check out: Fluoride Varnish in Orthodontic Care: Enhancing Enamel Protection During IPR Treatments

Advance Your IPR Practice

The Mr. Bur One Slice IPR Kit, with its ultra-thin X02 bur and complementary Diamond Strips like the SS08, empowers orthodontists to achieve precision, efficiency, and patient satisfaction in aligner and Invisalign treatments. Whether addressing mild crowding, refining anterior aesthetics, or optimizing aligner fit, this kit provides the tools to elevate your practice.

Ready to transform your IPR workflow? Visit the Mr. Bur website to explore the One Slice IPR Kit and its benefits for your practice.

Mr. Bur One Slice IPR Kit, comprehensive interproximal reduction bur set for precise enamel reduction in Invisalign and clear aligner orthodontic treatments.
At Mr Bur CANADA, we are committed to constantly improving on products through innovative technology to enable our customers in achieve their goals by pinpoint accuracy and perform minimally invasive procedures.

 

Diamond BursCarbide BursSurgical & Lab Use BursEndodontic bursIPR KitCrown Cutting KitGingivectomy KitRoot Planning KitOrthodontic KitComposite PolishersHigh Speed BursLow Speed Burs 

Mr Bur Home Page  All Products

Contact Us

More articles